Room simulator

Design your shutters

Enter your window size, then choose how the shutter is laid out and finished. The room updates as you go. What you make is a picture of what you would like, not a measured order.

1Window

The opening the shutter will fill. This tool accepts 9.84 in to 118.11 in wide and 17.72 in to 102.36 in high.

2Layout

Diagrams are drawn as seen from inside the room. Filled blue marks are hinges on the window side or a post; open marks join a bi-fold pair. The sketch underneath shows how the panels open into the room.

3Appearance

Colour

Colours on screen are approximate. Ask your dealer for a sample.

Louver size

Shown with provisional shapes. The 3½ in louver is based on photos of a sample; the 2½ in and 4½ in louvers are scaled from it to show the difference in look.

4Tilt rod

Position
Face

Front faces the room and back faces the glass. A side rod sits on the hinge side of each panel unless you ask for the other side.

A small clip joins each louver to the rod. This position is shown with end-cap clips. Other arrangements can be made, and your dealer will confirm the one that suits your window. See the clips up close in How It’s Built.

5Divider rail

The divider rail is 2.75 in high. The louvers above and below space themselves evenly around it. Both sections tilt together here.

6Frame

Frame profiles are provisional illustrations drawn from reference samples. They show the character of each frame and will be replaced by the manufacturing drawings.

7Review

Window
42 in wide by 60 in high, rectangular
Layout
Centre-opening pair (LR)2 panels, each about 20.07 in wide
Frame
L frame
Colour
Bright WhiteScreen colour is an approximation
Louvers
3½ in
Tilt rod
Side, frontEnd-cap clip
Divider rail
None

A visual preference to share with your dealer, not a manufacturing order. Sizes shown use demonstration geometry; your dealer measures and confirms the final specification.

Add this window to your project

A room or a place, for example “Living room, left”. Leave it empty to use Window 1.

Your designs help your dealer understand your project. Final measurements and specifications will be confirmed before ordering.